佐康U形密封圈RU3-ZURCON U-CUP RU3
Description
Today U-Cups are used primarily as seals for piston rods in
hydraulic cylinders. U-Cups in polyurethane are proven
elements, due to their good mechanical properties, for
standard cylinder construction, particularly for mobile
hydraulics under rough operating conditions.
Advantages
- Good sealing effect
- Good abrasion resistance, wear-resistant
- Compensates deflections of the piston rod
- Entry of dirt and air into the system is more or less
ruled out
- Unaffected by sudden loads and high pressures
- Simple installation.
Technical Data
Operating pressure: Max. 40 MPa
Speed: Up to 0.5 m/s
Temperature: Use in mineral oils:
-35°C to + 110°C
Media: Mineral oil-based hydraulic
fluids.
Material
Standard Zurcon: Z20
Special polyurethane: 93 Shore A
Colour: turquoise
