高壓旋轉軸封-Turcon Varilip PDR rotary shaft seals
Type A - is a single lip seal suitable for use in standard industrial applications up to a pressure of 0.5 MPa (73
psi) where an elastomer radial shaft seal would be unable to withstand the temperature, friction, medium or
poor lubrication. Allows sealing at surface speeds up to 90 m/s (17,721 ft/min) with sufficient cooling and
lubrication of the sealing lip.
Type B - is the preferred choice for applications in which a high seal integrity is demanded or where
contaminated media are to be sealed. This type offers a back-up sealing lip to provide secondary sealing.
Pressure limit is 0.5 MPa (73 psi).
Type C - can be used for applications involving higher pressures for which a simple elastomer radial shaft seal
can no longer be considered. Due to reinforcement of the sealing lip, pressures up to 1 MPa (145 psi) are
possible, e.g. as pump, shaft or rotor seals.
Type D - can be subjected to pressure from both sides. Pressure differential of up to 0.5 MPa (73 psi) is
permissible. The separation of two different media using a single seal is possible. The second lip can also take
on the function of a wiper or dust lip.
Type G - is similar to Type D but has a non-contacting environmental sealing element rather than a full laydown
lip. This provides effective sealing against the ingress of dust and dirt into the system while also
ensuring torque and resulting power consumption are kept to a minimum.
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
Standard elastomeric rotary shaft seals have a limited
application range with respect to temperature, surface
speed, media compatibility, pressure or a combination of
these due to the inherent limitations of the various
elastomer grades. Furthermore they only have a limited
suitability for applications with inadequate lubrication.
Turcon Varilip PDR rotary shaft seals are characterized in
particular by the low friction and their stick-slip-free
running, reducing the temperature generation and
permitting higher peripheral speeds.
Turcon has the characteristic of inherent memory,
whereby a distorted Turcon component will attempt to
recover to the profile it had during the sintering cycle of its
manufacturing process. This feature is used to provide the
necessary radial loading of the sealing lip onto the shaft,
negating the requirement for the energizing spring
present in elastomeric seal designs.
Turcon Varilip PDR seals are constructed from only two
parts - a precision manufactured metal body and a
mechanically retained Turcon sealing element. Unlike
seals with pressed metal cases, a gasket is not required to
provide sealing between the lip and casing. This is provided
by the mechanical retention of the lip, improving both the
chemical resistance and temperature range of the sealing
system.
Turcon Varilip PDR seals are available with a preferred
material choice of Stainless Steel 304L. Other materials such
as Stainless Steel 316L and Zinc-Plated Mild Steel are
available within the standard range. Table LXIII shows the
codes for these materials. Other specialized materials are
available on request. It should be noted that any material
other than Stainless Steel 304L will result in extended leadtime
due to stocking and / or additional process issues
TJ_1_0060
TJ_2_0060
TJ_1_0070
TJ_1_0080
TJ_2_0080
TJ_1_0090
TJ_2_0090
TJ_3_0090
TJ_1_0100
TJ_2_0100
TJ_3_0100
TJ_4_0100
TJ_1_0110
TJ_2_0110
TJ_1_0120
TJ_2_0120
TJ_3_0120
TJ_4_0120
TJ_5_0120
TJ_1_0140
TJ_2_0140
TJ_3_0140
TJ_4_0140
TJ_1_0150
TJ_2_0150
TJ_3_0150
TJ_4_0150
TJ_4_0160
TJ_1_0170
TJ_2_0170
TJ_3_0170
TJ_4_0170
TJ_5_0170
TJ_1_0180
TJ_2_0180
TJ_3_0180
TJ_4_0180
TJ_1_0200
TJ_2_0200
TJ_3_0200
TJ_4_0200
TJ_5_0200
TJ_1_0220
TJ_2_0220
TJ_3_0220
TJ_4_0220
TJ_1_0240
TJ_2_0240
TJ_3_0240
TJ_4_0240
TJ_1_0250
TJ_2_0250
TJ_3_0250
TJ_4_0250
TJ_5_0250
TJ_1_0260
TJ_2_0260
TJ_3_0260
TJ_1_0280
TJ_2_0280
TJ_3_0280
TJ_1_0300
TJ_2_0300
TJ_3_0300
TJ_4_0300
TJ_5_0300
TJ_1_0320
TJ_2_0320
TJ_3_0320
TJ_4_0320
TJ_5_0320
TJ_6_0320
TJ_1_0350
TJ_2_0350
TJ_3_0350
TJ_4_0350
TJ_5_0350
TJ_6_0350
TJ_7_0350
TJ_1_0360
TJ_2_0360
TJ_3_0360
TJ_4_0360
TJ_1_0380
TJ_2_0380
TJ_3_0380
TJ_4_0380
TJ_5_0380
TJ_6_0380
TJ_1_0400
TJ_2_0400
TJ_3_0400
TJ_4_0400
TJ_5_0400
TJ_6_0400
TJ_1_0420
TJ_2_0420
TJ_3_0420
TJ_1_0450
TJ_2_0450
TJ_3_0450
TJ_4_0450
TJ_1_0480
TJ_2_0480
TJ_1_0500
TJ_2_0500
TJ_3_0500
TJ_4_0500
TJ_1_0520
TJ_2_0520
TJ_1_0550
TJ_2_0550
TJ_3_0550
TJ_4_0550
TJ_1_0560
TJ_2_0560
TJ_3_0560
TJ_4_0560
TJ_1_0580
TJ_2_0580
TJ_1_0600
TJ_2_0600
TJ_3_0600
TJ_4_0600
TJ_1_0620
TJ_2_0620
TJ_1_0630
TJ_2_0630
TJ_1_0650
TJ_2_0650
TJ_3_0650
TJ_1_0680
TJ_2_0680
TJ_1_0700
TJ_2_0700
TJ_3_0700
TJ_1_0720
TJ_2_0720
TJ_1_0750
TJ_2_0750
TJ_1_0780
TJ_1_0800
TJ_2_0800
TJ_1_0850
TJ_2_0850
TJ_1_0900
TJ_2_0900
TJ_1_0950
TJ_2_0950
TJ_1_1000
TJ_2_1000
TJ_3_1000
TJ_1_1050
TJ_2_1050
TJ_1_1100
TJ_2_1100
TJ_1_1150
TJ_2_1150
TJ_1_1200
TJ_2_1200
TJ_1_1250
TJ_2_1250
TJ_1_1300
TJ_2_1300
TJ_1_1350
TJ_1_1400
TJ_1_1450
TJ_1_1500
TJ_1_1600
TJ_1_1700
TJ_E_D407
TJ_F_D507
TJ_G_D607
TJ_H_D707
TJ_J_D807
TJ_E_D408
TJ_F_D508
TJ_G_D608
TJ_H_D708
TJ_J_D808
TJ_E_D409
TJ_F_D509
TJ_G_D609
TJ_H_D709
TJ_J_D809
TJ_E_D410
TJ_F_D510
TJ_G_D610
TJ_H_D710
TJ_J_D810
TJ_E_D411
TJ_F_D511
TJ_G_D611
TJ_H_D711
TJ_J_D811
TJ_E_D412
TJ_F_D512
TJ_G_D612
TJ_H_D712
TJ_J_D812
TJ_E_D413
TJ_F_D513
TJ_G_D613
TJ_H_D713
TJ_J_D813
TJ_E_D414
TJ_F_D514
TJ_G_D614
TJ_H_D714
TJ_J_D814
TJ_E_D415
TJ_F_D515
TJ_G_D615
TJ_H_D715
TJ_J_D815
TJ_E_D416
TJ_F_D516
TJ_G_D616
TJ_J_D836
TJ_E_D438
TJ_F_D538
TJ_G_D638
TJ_H_D738
TJ_J_D838
TJ_E_D440
TJ_F_D540
TJ_G_D640
TJ_H_D740
TJ_J_D840
TJ_E_D442
TJ_F_D542
TJ_G_D642
TJ_H_D742
TJ_J_D842
TJ_E_D444
TJ_F_D544
TJ_G_D644
TJ_H_D744
TJ_J_D844
TJ_E_D446
TJ_F_D546
TJ_G_D646
TJ_H_D746
TJ_J_D846
TJ_E_D448
TJ_F_D548
TJ_G_D648
TJ_H_D748
TJ_J_D848
TJ_E_D450
TJ_F_D550
TJ_G_D650
TJ_H_D750
TJ_J_D850
TJ_F_D552
TJ_G_D652
TJ_H_D752
TJ_J_D852
TJ_F_D554
TJ_G_D654
TJ_H_D754
TJ_J_D854
TJ_F_D556
TJ_G_D656
TJ_H_D756
TJ_J_D856
TJ_F_D558
TJ_G_D658
TJ_H_D758
